Dicor Rubber Roof Lap Sealant (EPDM)
$19.99
-
Pricing is for a single tube.
Inspect your roof yearly and keep it new with Dicor colour matched sealant.
Helps create a watertight seal along a roof’s edges, air vents, vent pipes and screw heads. Dicor Products Lap Sealant is a versatile sealant formulated for EPDM roofing but also compatible with most other roofing material. It offers excellent adhesion to aluminum, mortar, wood, vinyl, galvanized metal and concrete. Continuously seals and remains flexible. Color matched, our lap sealants are UV stabilized to prevent discolouration and deterioration and will not stain or discolor any material to which it is applied.
- Self-Leveling (for horizontal surfaces)
Part Number Size Color 501LSB 10.3 oz. tube Black New! 501LSD 10.3 oz. tube Dove (Bright White) 501LSG 10.3 oz. tube Grey 501LST 10.3 oz. tube Tan 501LSV 10.3 oz. tube Ivory 501LSW 10.3 oz. tube White HAPS FREE Self-Leveling (no Hazardous Air Polluting Solvents)
Part Number Size Color 505LSB 10.3 oz. tube Black New! 505LSD 10.3 oz. tube Dove (Bright White) 505LSG 10.3 oz. tube Grey 505LST 10.3 oz. tube Tan 505LSV 10.3 oz. tube Ivory 505LSW 10.3 oz. tube White Non-Sag (for vertical surfaces)
Part Number Size Color 551LSB 10.3 oz. tube Black New! 551LSD 10.3 oz. tube Dove (Bright White) 551LSG 10.3 oz. tube Grey 551LST 10.3 oz. tube Tan 551LSV 10.3 oz. tube Ivory 551LSW 10.3 oz. tube White Installation Instructions
Directions for Use:
Clean surface of all dirt, loose paint, rust, oil and grease. Allow surface to dry before applying sealant. Use standard caulking equipment to apply sealant. In cold weather, warm container at room temperature before use.Approximate Lap Sealant Cure Times: (approximate times for 50-70° F weather)
5 Minutes – Skins over
4 Hours – Waterproof
48 Hours – Cure 80%
30 Days – 100% CureCaution: Keep away from heat, sparks and flame. To avoid breathing vapors, open windows and doors or use other means to insure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA TC23C or equivalent) or leave area. Causes nose, throat, eye and skin irritation.
Spills: Keep container closed when not in use. In case of spillage, absorb with inert material and dispose of in accordance with applicable regulations.
In Case of Fire: Use water spray, foam, dry chemical or carbon dioxide. Do not use a solid stream of water because it can scatter and spread the fire. Vapors are heavier than air and may travel along the ground to distant ignition sources and flash back.
First Aid: If swallowed, do not induce vomiting. Call a physician immediately. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Glasses or goggles are recommended. In case of eye contact, immediately flush eyes with plenty of water of at least 15 minutes. Chemically resistant gloves recommended. In case of skin contact, thoroughly wash affected area with soap and water.
Health Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful and fatal.